Posts Tagged ‘cable data’

Straight or Cross Data Cable

Cable Data is required in the relationship between networks, the relationship could be small or big defend requirement of your network. For the Local network cable configuration can be so critical although you can install using any deference color, but better if you using international standard configuration.

Example: your friends asking you to share you data or maybe music.

So for make that relationship between your computer and your friend computer you need cable data to make connection. Although cable data not the only solution for this problem but for the basic knowledge you need to know about this article.

Cable data using RJ 45 connector. For cable data you can use any kind of brand or category. For Category you can use cat 5, cat 5E, Cat 6. The maximum range 100 meters but you will losing signal at 90 meter defend of the quality and brand.

1. First prepare the tools that we will need to create a data cable. we start from; cutting pliers, Crimping, cutter, RJ45 connector, and of course paint the data cable cat 5 or 6.

2. Cut the skin around the data cable 10 cm cable and make sure the skin is not exposed in.

3. Cut pieces of color cables are about 5 cm.

4. After we cut, entry into the RJ 45 connector in accordance with the color combination. (See Table for the standard configuration)

5. To make a good connector, use the tool is that crimping meets international standards.
Input head or connector rj 45 , to rj 45 holes in the crimping tool. Press for a few moments until the tin plate contained about 45 g plug the data cable Contribute a better translation.

6. If you’re ready, test the cable that we have created a tool tester. If the configuration in accordance with what we expect, then you have successfully created a data cable.